Murphy Construction Machinery (Shandong) Co., Ltd. is one of the leading manufacturers and suppliers of complete steel track undercarriage in China. If you're going to buy the newest complete steel track undercarriage, welcome to get pricelist from our factory. All customized products are with high quality and low price.

The wear is on the shaft, not the frame.
Drill rig drift is commonly caused by shaft issues, not frame failure. Drive sprockets often see heavy wear before the problem is noticed.
We balance the wear life of track chains, sprockets and rollers to avoid uneven, accelerated wear. We can provide products with a carrying capacity between 3 tons and 200 tons, and customize manufacturing according to your installation point.
Whether it's rocks, clay, or complex and varied work slopes.
The wear mode of the track bearing assembly of a crusher operating in damp clay is completely different from that of a drilling rig operating on fractured rocks. Travel drives are matched to your hydraulic flow. Q345B beams, sealed rollers, hardened sprockets. Chassis tailored to your ground conditions.
We also provide comprehensive after-sales support to ensure that you can still obtain replacement parts such as support wheels and guide wheels at any time after the equipment is put into use. Welcome to free consultation and quotation.
Why Custom
Early track roller failure is often blamed on the part, but wear patterns tell us more.
Flange wear = misaligned track frame.
Uneven tread = poor load distribution across rollers.
Edge cracking = unplanned impact loads beyond design limits.
We design custom undercarriages with wear patterns in mind.
Frame alignment, roller layout, track shoe width and idler placement are tuned for your machine's weight distribution, ground conditions and turning behavior. The frame interface is built to match your mounting points, with 3D drawings exchanged to confirm the fit before production

Core Advantages
You can communicate directly with the manufacturer of the track chassis factory without going through any intermediaries. Whether it is technical issues related to load-bearing capacity, installation structure, or hydraulic interfaces, they will be directly fed back to the engineering team responsible for manufacturing the chassis. Communication does not need to be conveyed, ensuring that details are not overlooked during the transmission process.
The track chassis is customized according to your equipment, not based on existing inventory, track length, track shoe width, chassis height, and drive mode selection, all strictly customized according to the technical specifications of your existing equipment. The final delivered product is perfectly compatible with your existing equipment, without the need for any additional modifications or adjustments.
Before formally cutting the steel, both parties will confirm the precise parameters of the interface in order to effectively reduce risks. We will verify the installation points, connection heights, and hydraulic interfaces based on the drawings or samples you provide. This not only avoids the trouble of secondary renovation on site, but also shortens the cycle from product delivery to production.

Machine Fit
Take a water well drill rig operating on soft ground. Its tracks sink, the frame flexes, and the rig drifts off course.
We build crawler undercarriage assemblies to match your host machine. That includes excavators, water well rigs, exploration drills, roadheaders, tracked carriers, and older mining equipment. Track frame, rollers, idlers, sprockets, and travel drives are matched to the load your application actually puts through them, not picked from a generic list.
You only need to inform us of the equipment type and operating environment, and we will customize the installation interface to ensure that it perfectly matches your rack, bolt hole position, and hydraulic pipeline layout. Throughout the entire process, your host does not require any cutting or modification. We follow the same customization process for both new machine manufacturing and old machine renovation.

Custom Capability
Whether you are replacing the tracked undercarriage on existing machinery or developing an entirely new one for new equipment, we can devise a tailored solution based on your technical drawings and specifications.
Every critical interface-from mounting hole positions and frame dimensions to track center-to-center distance and load-bearing requirements-can be discussed and customized to align with your equipment's design.
If you do not have technical drawings, you can simply provide photos of your existing equipment, along with basic dimensions and details regarding the mounting interfaces. We will evaluate the information provided and let you know what additional measurements are required.

Crawler track bases can be customized to suit your equipment requirements. Please contact us if you need a configuration tailored to a specific project.
Technical Parameters
X-shaped crossbeam overall chassis




| CODE NAME | A | B | C | D | E | F | G | H | I | J | K | APPLICATION |
| *MEFW25 | 1540 | 2030 | 250 | 520 | 535 | 578 | 230 | 300 | 1165 | 1250 | 1550 | 2.5Ton excavator |
| *MEFW35 | 1635 | 2110 | 260 | 525 | 540 | 585 | 245 | 300 | 1340 | 1440 | 1740 | 3.5Ton excavator |
| *MEFW60 | 2060 | 2575 | 275 | 595 | 635 | 705 | 370 | 400 | 1560 | 1600 | 2000 | 6Ton excavator |
| *MEFW70 | 2197 | 2823 | 327 | 694 | 723 | 776 | 390 | 450 | 1318 | 1800 | 2250 | 7Ton excavator |
| MEFW100 | 2414 | 3065 | 340 | 690 | 754 | 804 | 440 | 450 | 1404 | 1450 | 2350 | 10Ton excavator |
| MEFW120 | 2743 | 3475 | 380 | 766 | 817.5 | 870.5 | 443.5 | 500 | 1273 | 1900 | 2400 | 12Ton excavator |
| MEFW200 | 3360 | 4160 | 410 | 940 | 993 | 1075 | 475 | 600 | 2180 | 2200 | 2800 | 20Ton excavator |
| MEFW300 | 4030 | 4940 | 464 | 1068 | 1090 | 1230 | 525 | 600 | 2560 | 2600 | 3200 | 30Ton excavator |
| MEFW360 | 4080 | 5045 | 475 | 1173 | 1205 | 1352 | 562 | 600 | 2480 | 2600 | 3200 | 36Ton excavator |
| MEFW500 | 4410 | 5460 | 540 | 1195 | 1215 | 1385 | 585 | 600 | 2520 | 2760 | 3360 | 50Ton excavator |
| MEFD150 | 2565 | 3208 | 341.5 | 714.5 | 855.5 | 855.5 | 355.5 | 450 | 1250 | 1810 | 2260 | 15Ton Vertical Pole Machine |
| MEFD150A | 2333 | 3062 | 364.5 | 793 | 858 | 838 | 358 | 400 | 975 | 1435 | 1835 | 15Ton Pillow Changing Machine |
| MEFF220 | 3640 | 4480 | 448 | 1036 | 1133 | 1222 | 660 | 700 | 2055 | 2795 | 3495 | 22Ton Wood Grabbing Machine |
| MEFD500 | 4470 | 5479 | 521.5 | 1181 | 1194 | 1324 | 574 | 800 | 1780 | 2740 | 3540 | 60Ton Pile Driver |
| MEFZ500 | 4871 | 5801 | 472 | 1136 | 1302 | 1287 | 534 | 600 | 2990 | 4000 | 4642 | 50Ton Material Loading And Unloading Machine |
| MEFD1000A | 4010 | 5150 | 552 | 1264 | 1213 | 1358 | 588 | 900 | 2760 | 3660 | 4614 | 100Ton Fabric Machine |
Structural Quality
The legs connecting the center frame to the track frames are cast steel, not welded plate. Casting adds thickness at high-load zones with a convex top face, for better mud shedding and to stop debris from reaching the swing bearing.
Rollers and idlers are fitted with floating oil seals. The grease-style track tensioner has a visible stroke.
It carries the machine's total weight and guides the track assembly while working.
Track roller specs and layout are selected to fit the complete undercarriage system.

Manufacturing Strength
Steel plates arrive at one side of the workshop and undergo cutting, welding, machining, quenching, and assembly-every step is completed before the finished product leaves the facility.
No outsourced unfinished frame processing. We keep full control of all machining in-house.
Main frames use full-penetration welding. Each undercarriage is trued on a jig before roller installation.
The steel we use is fully traceable back to the original heat number. We verify the quenching depth of idlers and rollers on our own workbench, rather than relying solely on certificates. When a custom-designed steel tracked undercarriage-built for a drill rig or a pile driver-is in production, the engineer responsible for the mounting interfaces personally visits the welding shop to oversee the process. This isn't a marketing gimmick-it's simply how we operate every single day.
Curious about who welded your undercarriage? Just ask-we'll be happy to tell you their name.

Customization Process
1. When an inquiry arrives, our first step is to identify any missing information. Simply knowing the machine model is not enough; we also require details such as mounting hole spacing, the intended track shoe width, and the ground conditions.
2. The drawing review phase is where the core technical work takes place. Our engineers develop the layout for the track undercarriage assembly and perform calculations for load and ground pressure. We verify critical items at this stage: drive setup, roller count and undercarriage mounting interface.
This avoids later field issues. Production starts only once drawings and specs are confirmed.
3. In the workshop, every stage of the track undercarriage system's assembly undergoes rigorous inspection, followed by a load test before the unit is cleared for shipment. Inspection records are included with the equipment. Delivery is straightforward: the mounting points are pre-aligned, and all necessary documentation is packed in the crate, ensuring the unit is ready for installation upon arrival.

Project Cases
Our OEM orders start with undercarriage prototypes. Machine performance speaks for our design.
Our tracked assemblies are working on water well and anchor rigs throughout Southeast Asia. In that region, the ground can turn into a quagmire for half the year; if the undercarriage frame lacks sufficient rigidity, the drill hole will inevitably drift off-target.Repeat orders for the same steel tracked undercarriage speak for our quality.
Our frame geometry and track roller seals perform well under heavy, demanding loads.
Whether it's a tracked undercarriage for a 20-ton drill rig or for a compact carrier vehicle, our workshop builds custom undercarriage frames based on your blueprints-we don't expect you to adapt your equipment to fit our off-the-shelf inventory. Send over your machine model and operating weight.
We share our relevant past cases and suggest the most suitable undercarriage for you.

Packaging and Transportation
1. We never leave a crawler undercarriage assembly unprotected at the bottom of a container. Machined surfaces coated with anti-rust primer. Wood blocks support the track frame to avoid impact with the travel drive in transit.
Stretch film wrapping before container closing, for protection against salt spray corrosion.
2. Shipment Arrangements
We tailor the container loading plan to your specific container type. Undercarriages are loaded first and secured with steel straps and wooden bracing.
Shifting during ocean transit leads to costly damage and repairs on arrival.Whether the terms are FOB or CIF, we coordinate directly with your freight forwarder and provide you with the packing list and shipping marks before the vessel departs.
3. Arrival Information
Once loading is complete, you will receive the container number and shipment details. The packing list, shipping marks, and undercarriage specifications are included with the shipment, ensuring your freight forwarder won't have to chase us for documentation when the vessel arrives.

Contact Us
How To Cooperate With Us?
Murphy Company began operations in 2022, though the people behind it had already built up well over a decade of experience in construction machinery.
Every tracked chassis assembly we design gets its start the same way-by asking how this particular host machine will really behave on site. That answer drives every decision: track shoe width, chassis size, load capacity, travel speed, and supporting components are all customized to your requirements. What you end up with is a tailor-made crawler solution ready for engineering, construction, and mining work of all kinds.
-
Phone Number
+ 86 175 6277 7823
-
Phone Numbermefgcjx@126.com


FAQ
FAQ
Q: What information is needed for a quotation?
We need machine total weight, target ground pressure, climbing requirement, mounting drawing or interface size, hydraulic pressure, working terrain, order quantity and destination country/port.
Q: What are your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q: What is your lead time? What shipping methods do you support?
A: Lead times depend on the product type and order quantity: 10–25 days for standard products, and 30–50 days for customized products (depending on the level of complexity). We support various logistics options, including sea, air, and rail freight. We also offer a range of trade terms, such as FOB and CIF.
Q: Can your engineer support remote technical guidance for assembly?
Yes. We can design drop‑in replacement steel track undercarriage. Please send photos, original dimension data and failure description of your old undercarriage for evaluation.
Q: Can you replace an existing undercarriage?
A: Absolutely. We can pack extra wear parts in same shipment to save your freight cost.
Q:Can you customize according to our drawings?
A: Yes. Our engineering team can manufacture steel track undercarriage strictly following your 2D drawings, 3D models and technical specifications. We will review your drawings first and confirm all dimensions, load requirements and interface details before production.
Hot Tags: complete steel track undercarriage, China complete steel track undercarriage manufacturers, suppliers, factory
